NXP i.MX 6ULL ARM® Cortex®-A7 CPU on PicoCore™MX6ULL
The module is based on a NXP i.MX 6ULL ARM® Cortex®-A7 CPU with up to 900MHz.
The PicoCore™MX6UL is offered with up to 512MB SLC NAND Flash or up to 32GB eMMC, an EEPROM is also on the module. Two 80 poles plug connectors (1,5-4mm board-to-board distance) enable numerous interfaces on the base board. Up to 2x Ethernet, 2x USB, 2x CAN, 4x I2C, 4x SPI,
6x UART, Audio (Line In/ Out/ Mic/ Headphone or I2S), SDIO for SD-Card Slot and others are possible.
A 18/ 24bit RGB interface is available for display connection and TFTs up to WXGA can be controlled. The CPU offers sufficient performance for a modern control interface with e.g. 7“ TFT or 10.1“ TFT. An I2C interface is used to connect a PCAP touch panel. Voltage supply is 5V, power consumption is around 1W (typ.). The temperature range is 0°C - +70°C. -40°C - +85°C is also possible as a special version (special versions on request). F&S Elektronik Systeme GmbH also offers customer-specific boards based on the i.MX 6ULL ARM® Cortex®-A7 CPU (feel free to send us the specification of your preferred module).
The Linux operating system (Buildroot and Yocto are supported) was ported by the experienced software team of F&S Elektronik Systeme. Drivers were customized and tested for all interfaces.
We offer a virtual machine, so you can immediately start developing own applications under e.g. QT.
Along with Secure Boot (signed, encrypted), the module has an additional Security Chip.
The programming of the certificates is offered as a service.
Windows Embedded Compact is available on request.
The F&S project guarantee accompanies the customers from the project start to its successful finish. For this we offer starterkits (also with 7“ TFT) and workshops (Linux, QT, Security), documentation for hard- and software development and free support by the experienced engineers of F&S Elektronik Systeme GmbH.
PicoCore™MX6UL is available until minimum 2030. More PicoCore™ modules, also with i.MX 8 Cortex®-A53 CPU (64 Bit), will follow.
Published on: Nov 15 2019
Tags: New product